Application of Air Concentrating Table for Improvement in the Quality Parameters of the Commercial Product “Jaret®”

Authors

  • Ireneusz BAIC Author
  • Wiesław BLASCHKE Author
  • Wojciech SOBKO Author
  • Andrzej FRAŚ Author

DOI:

https://doi.org/10.29227/IM-2015-01-30

Keywords:

hard coal, dry separation, air concentrating table, desulfurization

Abstract

Dry deshaling of raw coal is a method which allows to limit the amount of rock grains in raw coal. The result of this process is the ability to achieve a significant improvement in the quality parameters (calorific value) of the commercial products. There is also the possibility to limit the total sulfur content and ash content in the produced commercial products obtained from raw coal. This is confirmed by the tests carried out by "Centre of Waste & Environment Management” of the Institute of Mechanized Construction and Rock Mining with applying an air concentrating table – FGX. This chapter presents the results of desulfurization and ash removal from the commercial product JARET®, obtained from the production process of the Coal Company "Janina" being a part of TAURON-Wydobycie S.A. The technological requirements of the dry deshaling process are also presented.

Author Biographies

  • Ireneusz BAIC

    Dr, inż.; Institute of Mechanized Construction and Rock Mining – Branch in Katowice, “Centre of Waste & Environment Management”, 40-157 Katowice, Al. W. Korfantego 193 A, Poland;

  • Wiesław BLASCHKE

    Prof.; Institute of Mechanized Construction and Rock Mining – Branch in Katowice, “Centre of Waste & Environment Management”, 40-157 Katowice, Al. W. Korfantego 193 A, Poland;

  • Wojciech SOBKO

    Mgr inż.; Institute of Mechanized Construction and Rock Mining – Branch in Katowice, “Centre of Waste & Environment Management”, 40-157 Katowice, Al. W. Korfantego 193 A, Poland;

  • Andrzej FRAŚ

    TAURON-Wydobycie S. A., Jaworzno, 43-600 Jaworzno, ul. Grunwaldzka 37, Poland;

Published

2015-06-02

Most read articles by the same author(s)