Monitoring the Vibration of Screening Frames Used in the Construction Industry

Authors

  • Leopold Hrabovský Author
  • Štěpán Pravda Author
  • David Šeděnka Author

DOI:

https://doi.org/10.29227/IM-2025-02-02-003

Keywords:

construction debris, vibratory sorter, rubber spring, vibration, effective velocity value

Abstract

This paper discusses the operational monitoring of a vibratory machine that is used to sort construction debris separated from construction wastes. At reconstruction and demolition works in the construction industry, vibratory sorters are used to sort construction debris, using vibratory motors to vibrate the vibratory screens. Sorting screens are supported by springs to dampen vibrations generated by vibration motors, which are transmitted to the vibratory sorter frame. The paper outlines a procedure to optimally select the stiffness of rubber springs depending on the total weight of vibrating masses and the own frequency of the vibratory sorter. The sensor measurement has been used to determine the relationship between the compressive forces acting on rubber springs (which are digital inputs) and their elastic deformation. The characteristics of rubber springs generated by laboratory measurements are a valuable asset in the selection of the actual springs that are installed in vibratory sorters used in the construction industry. The contribution can be justified by the fact that the spring stiffnesses specified in manufacturers' catalogues are often different from the actual stiffness values. Based on the monitoring and analysis of the measured velocity values, i.e. the vibration signals transmitted to the frame of the vibration machines, the optimum operating mode of the vibration machines can be diagnosed and detected in a very efficient and disassembly - free way and thus any emerging fault can be identified . The main objective of the measurements performed on the vibration sorter model has been to detect the magnitude of the effective vibration velocity values in the required time period using sensors, thus enabling monitoring, data collection and storage for the purpose of autonomous operation of vibration machines. The ability to sense and analyse the magnitude of vibrations transmitted to the frame of vibratory machines, allows to increase the safety and reliability of the operation of vibratory machines used in the construction industry. The mitigation of risks of accidents during maintenance, even during work activities, of vibratory machines and ensuring their trouble - free operation without the need for human presence due to the use of automation and sensor monitoring has been an important aspect.

Author Biographies

  • Leopold Hrabovský

    VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machine and Industrial Design, 17. listopadu 2172/15, 708 00 Ostrava - Poruba, Czech Republic; ORCID: 0000-0003-3700-8041.

  • Štěpán Pravda

    VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machine and Industrial Design, 17. listopadu 2172/15, 708 00 Ostrava - Poruba, Czech Republic; ORCID: 0000-0002-5188-9095.

  • David Šeděnka

    VSB - Technical University of Ostrava, Faculty of Mechanical Engineering, Department of Machine and Industrial Design, 17. listopadu 2172/15, 708 00 Ostrava - Poruba, Czech Republic; ORCID: 0000-0002-2918-5630.

Published

2025-11-05

Most read articles by the same author(s)