Comparative Evaluation of CFRP Modeling Approaches for the Simulation of Strengthened HCS
DOI:
https://doi.org/10.29227/IM-2025-02-02-049Keywords:
Hollow - core slabs, Carbon fiber reinforced polymers, Finite element modeling, Structural performanceAbstract
The objective of this study is to assess, through numerical simulation, the effect of CFRP sheet strengthening on the structural behavior of prestressed hollow - core slabs (HCS), using the ABAQUS 6.13 software suite. Extensive research over the past decade has identified externally bonded CFRP as an effective solution for strengthening prestressed concrete elements, including HCS with non - circular voids. The numerical simulation of CFRP - strengthened hollow - core slabs is inherently complex, influenced by factors such as construction methodology, loading scenarios, and nonlinear material properties. Several modeling approaches have been proposed in the literature, each aiming to address specific aspects of these complexities. The retrofitting technique in this study involved applying CFRP sheets to the internal end regions of the slab voids, over a length of 300 mm, using one and two layers, respectively. To simulate the CFRP material, two modeling approaches were examined. The first involved skin reinforcement, which consists of applying a bonded layer to a part’s surface and incorporating defined material and structural properties. The second modeling approach involved contact interaction with cohesive behavior, aiming to capture potential debonding effects. The developed finite element models were validated by comparison with test results from an extensive experimental investigation. The Concrete Damage Plasticity (CDP) model was adopted for concrete behavior, while the Mises yield surface was used for modeling isotropic metal plasticity. For the CFRP material, the simulation process included two stages. First, orthotropic elasticity in plane stress (lamina) was defined using ABAQUS 6.13. In the second stage, Hashin’s failure criteria for unidirectional fiber composites were applied to evaluate the failure response of the CFRP sheets. Results are presented in terms of the load – deflection relationship, crack patterns, and von Mises stress distribution. In addition, a parametric investigation was carried out to analyze the influence of CFRP strengthening length and thickness on the load - bearing capacity and stiffness of the specimens.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Ilinca - Florina Moldovan, Mihai Nedelcu, Stefan - Marius Buru (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.