Evaluation of Rock Debris Based on Particle Shapes and Sizes
DOI:
https://doi.org/10.29227/IM-2026-02-02-023Keywords:
rock debris, particle size distribution, shape coefficient, rock disintegrationAbstract
This study focuses on characterizing the shape of drill cuttings produced during drilling in limestone, andesite, and granodiorite. These rock debris particles were collected in containers during drilling as a result of rock disintegration . The drill cuttings were analyzed using wet - sieve analysis with six sieves of different mesh sizes. The rock debris was divided into seven classes. When evaluating particle shape, we focus on the second class, which has the largest particles, ranging from 400 μm to 1000 μm, but accounts for the lowest percentage of the total weight of drilling debris. Particle size distribution was measured using the Camsizer X2 particle size and shape analyzer (Retsch , Germany) with dual camera technology and an X - dry sample feeder. From data obtained from the particle analyzer, we evaluated particle shape using diagrams by Sneed & Folk, which categorize drill cuttings into seven descriptive classes. Through this analysis, we aimed to gather information about the interaction between rocks and surface - set diamond core drill bits. The aim was to monitor changes in the shape and size of particles from the analyzed larger rock fragments after drilling rock samples. Changes in particle size relative to their shape were assessed using a cal culated shape coefficient. The coefficient is represented by a single number for each rock specimen. Using the coefficient, we can identify changes in the constant drilling regimes, including the drilled length and the type of drilling tool used. Such an assessment of particle shape would help provide a more detailed evaluation of the selection of drilling tools and their wear .
References
1. A. Ersoy and M.D. Waller, “Textural characterisation of rocks”, Engineering Geology 39, 123 - 136 (1995).
2. M. Bali Hudáková, A. Kiovský, V. Krúpa, P. Vavrek, E. Lazarová, L. Ivanicova, “The Evaluation of the Wear of Surface - set Diamond Drill Bits by Analysing the Rock Debris and Process Parameters”, Inżynieria Mineralna 30 (2), 1 - 7 (2025).
3. M. Ali Maroof, A. Mahboubi, A. Noorzad, Y. Safi, “ A new approach to particle shape classification of granular materials ” , Transportation Geotechnics 22, (20 20 ) , https://doi.org/10.1016/j.trgeo.2019.100296
4. Y. Ghasemi, M. Rajczakowska, A. Cwirzen, “ Estimation of specific surface area of particles based on size distribution curve ” , Magazine of Concrete Research 7 0 ( 10 ), 533 – 540 (20 18 ).
5. J.C. Santamarina, K.A. Klein, Y.H. Wang, E. Prencke, “ Specific Surface Determination and Relevance ” , Canadian Geotechnical Journal, 39, 233 - 241 (2002).
6. R.P. Chapuis, “ Predicting the saturated hydraulic conductivity of soils: a review ” , Bulletin of Engineering Geology and the Environment 71 , 401 – 434 (2012) .
7. G. Lees , “ A new Method for Determining the Angularity of Particles ” , Sedimentology 3 , 2 – 21 (1964).
8. E. D. Sneed and R. L. Folk , Pebbles in the lower Colorado river, Texas: A study in particle morphogenesis. The Journal of Geology, 66 (2), 114 – 150 (1958).
9. D. J. Graham and N. G. Midgley. “ Graphical representation of particle shape using triangular diagrams: An Excel spreadsheet method ” , Earth Surface Processes and Landforms 25(13), 1473 – 1477 (2000) .
10. Google. (n.d.). Particle Shape Analysis. Available from https://serc.carleton.edu/files/NAGTWorkshops/sedimentary/activities/particle_shape.pdf
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Mária Bali Hudáková, Víťazoslav Krúpa, Alexander Kiovský, Pavol Vavrek, Edita Lazarová, Lucia Ivaničová (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.