Selecting Parameters to Design Auxiliary Ventilation in Underground Mine

Authors

  • Phuong Thao DANG Author

DOI:

https://doi.org/10.29227/IM-2023-02-40

Keywords:

air leakage, maximum ventilation length, auxiliary ventilation, duct, working face

Abstract

In recent years, Quang Ninh coal mines are continually expanding on size and depth, the total length of the roadway each year amounts about ten thousands meters in order to reach new production zones. The length of new roadways is usually longer, leading to increase to the airflow demand. Ventilation is one of the main factors effecting driving progress of the roadway. The estimation of airflow requirements is usually based on the minimum amount of airflow required at the heading during driving roadways or at the working face, in other words, when the ventilation ductwork is at its maximum length. Therefore, determination of maximum ventilation length of ductwork has been undertaken. This results allow the selection of a reasonable fan to meet the ventilation requirements when driving the roadway. Also, this value is an important parameter for designing auxiliary ventilation system that operates more efficiently on a lower cost.

Author Biography

  • Phuong Thao DANG

    Mining Faculty, Hanoi University of Mining and Geology, Hanoi, Vietnam; 18 Vien Street, Duc Thang Ward, Bac Tu Liem District, Hanoi, Vietnam

Published

2023-11-01

Most read articles by the same author(s)