Determination of Risk Elements in Mine Waste Dump Soil Sample Using Sequential BCR Extraction

Authors

  • Barbora VALOVÁ Author
  • Iva KOTALOVÁ Author
  • Silvie HEVIÁNKOVÁ Author

DOI:

https://doi.org/10.29227/IM-2020-01-69

Keywords:

BCR sequence analysis, dump, ICP – MS, mobility, mining waste, risk elements, soil

Abstract

The article deals with the determination of mobility of selected risk elements in soil samples of thermally active dump resulting from mining activities in the Ostrava region. The samples were taken from Hedvika dump during 2017 to 2018. Extraction of soil samples was performed using three-step sequential extraction of BCR (Bureau Community of Reference). Sequential extraction can provide information about the processes that normally take place in the environment. The solid soil component is gradually leached in the various extraction agents from the weakest to the strongest. This provides information on the total amount of risk elements potentially available under specific environmental conditions. Selected risk elements (Cr, Cu, Ni, Zn) were determined by ICP - MS method (In - ductively coupled plasma mass spectrometry) and AAS (Atomic absorption spectrometry) (Zn). Nitric acid leaching was performed to supplement the total BCR extraction analysis.

Author Biographies

  • Barbora VALOVÁ

    VSB- Technical University of Ostrava, Faculty of Mining and Geology, 17. listopadu Str. 15, 708 33 Ostrava – Poruba, Czech Republic

  • Iva KOTALOVÁ

    VSB- Technical University of Ostrava, Faculty of Mining and Geology, 17. listopadu Str. 15, 708 33 Ostrava – Poruba, Czech Republic

  • Silvie HEVIÁNKOVÁ

    VSB- Technical University of Ostrava, Faculty of Mining and Geology, 17. listopadu Str. 15, 708 33 Ostrava – Poruba, Czech Republic

Published

2020-06-30

Most read articles by the same author(s)